36
SETUP
Language
Highlight Language.
Use the desired functional key to change the option. Wait until new language is loaded. If language
load fails the instrument will try to reload current language.
If any language can’t be loaded, the instrument will work in safe mode. In this mode all messages are
displayed in English and Help is not available.
Temperature Unit
Highlight Temperature Unit.
Press the displayed functional key in order to change the temperature unit.
Beep On
Highlight Beep On.
Press the displayed functional key to enable/disable beep.
When enabled, beep sounds as a short beep every time a key is pressed or when the calibration can
be confirmed.
A long beep alert that the pressed key is not active or a wrong condition is detected while in
calibration.
To Next Page
Loading...
Need help?
General
