Hanna Instruments HI98190 User Manual

31
SETUP
Setup mode allows viewing and modifying the measurement parameters.
These are general SETUP parameters for all the ranges and range specific parameters.
The following table lists the general SETUP parameters, their valid range and the factory default
settings.
Description Valid value Default
Backlight Backlight level 0 to 7 4
Contrast Contrast level 0 to 20 10
Auto light off Time until backlight is ON 1, 5, 10, 30 min 1
Auto power off Time after the instrument is
powered OFF
Disabled
5, 10, 30, 60 min
30
Date/Time 01.01.2006 to 12.31.2099
00:00 to 23:59
current
date/time
Time Format AM/PM or 24 hours 24 hours
Date Format DD/MM/YYYY
MM/DD/YYYY
YYYY/MM/DD
YYYY‑MM‑DD
Mon DD, YYYY
DD‑Mon‑YYYY
YYYY‑Mon‑DD
YYYY/MM/DD
Language Message display language Up to four languages English
Temperature unit °C or °F °C
Beep ON Beeper Status Enabled or Disabled Disabled
Instrument ID Instrument identification 0000 to 9999 0000
Baud RAte Serial Communication 600, 1200, 2400, 4800,
9600
9600
Meter information Displays general information

Hanna Instruments HI98190 Specifications

General

Brand	Hanna Instruments
Model	HI98190
Category	Measuring Instruments
Language	English