15
PARAMETER SETUP MENU
TDS UNIT (HI763093 EC PROBE ONLY)
Option: ppm-ppt or mg/L-g/L
Press the functional key to select the desired TDS unit.
RESISTIVITY UNIT (HI763093 EC PROBE ONLY)
Option: MΩ•cm, Ω•cm, KΩ•cm
Press the functional key to select the desired resistivity unit.
SEAWATER σ UNIT (HI763093 EC PROBE ONLY)
Option: σ
t
, σ
0
, σ
15
Press the functional key to select the desired seawater unit.
The measurement is calculated from the conductivity measurement and depends on water pressure,
temperature and salinity. Users can select the reference temperature: t (current temperature), 0 (0 °C)
or 15 (15 °C).
EC RESOLUTION UNIT (HI763093 EC PROBE ONLY)
Option: Auto, Auto mS/cm, 1 µS/cm, 0.001 mS/cm, 0.01 mS/cm, 0.1 mS/cm, 1 mS/cm
Press the Modify key to change the EC resolution. Use the / arrow key to select the resolution.
Press Select to confirm or ESC to return to the menu without saving.
Auto allows the meter to choose the range that will optimize the measurement.
Auto mS/cm allows the meter to choose the range that will optimize the measurement, reading will
be in mS/cm only.
1 µS/cm, 0.001 mS/cm, 0.01 mS/cm, 0.1 mS/cm or 1 mS/cm the meter will display the
measurement in the selected resolution.
To Next Page
Loading...
Need help?
General
