40
PC CONNECTION MODE
12. PC CONNECTION MODE
The logged data from a probe or meter can be transferred to a PC using the HI9298194 Windows
®
compatible application software.
HI9298194 allows data to be imported into most spreadsheet programs (e.g. Excel
©
, Lotus 1-2-3
©
).
12.1. SOFTWARE INSTALLATION
• Type http://software.hannainst.com/
• Download the file HI9298194 application software.
• Extract and run the executable file to install the application.
12.2. METER TO PC CONNECTION
• With the meter OFF, disconnect the probe.
• Connect the USB cable to the meter and to a USB port.
• Turn the meter ON and the message “PC connected” will be displayed.
• Run the HI9298194 application software.
• Press Setting button on the top of the screen and select the measurement units.
• To access the meter data select the Meter button on the toolbar at the top of the screen. The
PC-meter connection will be established and the following meter data will be displayed: status
information (software version and date, SN, ID, battery level and available memory space), as
well as a summary of logged data lots. The logged lots can be saved to the PC by pressing the
“Download lot” button after the desired lot is selected.
• Once the lot has been downloaded, all the logged samples can be viewed.
To Next Page
Loading...
