Hanna Instruments reserves the right to modify the design, construction or appearance of its products
without advance notice.
HI98199 is warranted for two years against defects in workmanship and
materials when used for its intended purpose and maintained according to
instructions. Electrodes and probes are warranted for a period of six months.
This warranty is limited to repair or replacement free of charge. Damage
due to accidents, misuse, tampering or lack of prescribed maintenance is
not covered.
If service is required, contact your local Hanna Instruments Office. If under
warranty, report the model number, date of purchase, serial number (see
engraved on the back of the instrument) and the nature of the problem. If
the repair is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization number from the Technical Service
department and then send it with shipping costs prepaid. When shipping any
instrument, make sure it is properly packed for complete protection.
Warranty
Before using this product, make sure it is entirely suitable for your specific
application and for the environment in which it is used. Any variation
introduced by the user to the supplied equipment may degrade the
instrument’s performance. For yours and the instrument’s safety do not use
or store the instrument in hazardous environments.
Recommendations
for users
To Next Page
Loading...
Need help?
General
