36
STATUS
TEMPERATURE
• From the GLP menu, use the / keys to highlight Temperature option and then press Select.
• Data regarding the last temperature calibration will be displayed: calibrated point, time and date.
• Use the / keys to scroll through the stored data for the last 5 calibrations.
Notes: If no user temperature calibration has been performed or if the factory calibration was
restored, the offset value is set to default, and the message ”Factory calibration” is displayed.
Press ESC to return to the previous screen.
ATMOSPHERIC PRESSURE
• From the GLP menu, use the / keys to highlight Atm. pressure option and then press Select.
• Data regarding the last atmospheric pressure calibration will be displayed: custom calibration
point, time and date.
• Use the / keys to scroll through the stored data for the last 5 calibrations.
Notes: If no atmospheric pressure calibration has been performed or if the factory calibration was
restored, the offset value is set to default and the message ”Factory calibration” is displayed.
Press ESC to return to the previous screen.
To Next Page
Loading...
