44
R649c
SEPTEMBER 2018
Hansen Technologies Corporation
681 Commerce Street
Burr Ridge, Illinois 60527 USA
Tel: 630.325.1565 Fax: 630.325.1572 Toll: 866.4HANSEN
Email: sales@hantech.com Web: www.hantech.com
USA ∙ Asia ∙ Europe ∙ India ∙ LatinAmerica ∙ MiddleEast
© Hansen Technologies Corporation
TO ORDER:
Specify valve type (MCV, MCXV, MCR), port size, flange
connection style and size.
Motorized Control valves with weld-in connections
available (3/4˝ thru 4˝), contact factory.
ORDERING INFORMATION
FPT only available up to and including 1¼˝ port size.
PORT SIZE
FLANGE CONNECTION
STYLES AND SIZES
FPT, SW, WN ODS
INCH (MM) STANDARD ALSO STANDARD
1/16˝ (2) 1/2˝ 3/4˝ 7/8˝
7/32˝ (5) 1/2˝ 3/4˝ 7/8˝
9/32˝ (7) 1/2˝ 3/4˝ 7/8˝
3/4˝ (20) 3/4˝ 1, 1-1/4˝ 7/8˝
1˝ (25) 1˝ 3/4˝, 1-1/4˝ 1-1/8˝
OPTIONAL CONTROLLERS
MOTORIZED CONTROL VALVE OPTIONAL CONTROLLERS
ACT™
Hansen’s advance corrosion protection system ACT™,
Anti-Corrosion Technology, is available for all Hansen
valves. ACT™ provides 3x to 5x the corrosion protection
of standard zinc plating and offers lower acquisition and
life cost when compared to other corrosion protection
methods. ACT™ protected valves follow all standard and
control valve installation processes.
MVP
The Hansen Technologies Multi-Valve
Platform (MVP) is a rugged, compact
refrigerant control station. The MVP
ships pre-tested and assembled for quick
and easy installation, requiring only two
welds to complete most valve station
applications. MVP control functions include Motorized
Control Valves (positions 3 and 4), solenoid valves, two-
step solenoid valves, and all common Hansen
pressure regulator functions. MVP utilizes
many of the same pilot modules and internal
components as the standard Hansen pressure
regulator and solenoid valves
CAUTION
Hansen valves are for refrigeration and other Hansen
approved systems only. These instructions and related
safety precautions must be read completely and
understood before selecting, using, or servicing these
valves. Only knowledgeable, trained refrigeration
technicians should install, operate, or service these
valves. Stated temperature and pressure limits should
not be exceeded. Bonnets should not be removed from
these valves unless the system has been evacuated to
zero pressure. See also Safety Precautions in current List
Price Bulletin and Safety Precautions Sheet supplied with
product. Escaping refrigerant can cause injury, especially
to the eyes and lungs.
WARRANTY
Hansen electrical and electronic parts are guaranteed
against defective materials and workmanship for 90 days
F.O.B. our plant. All other components are guaranteed for
one year F.O.B. our plant. No consequential damages or
field labor is included.
CAT NO DESCRIPTION
PXVC-T
Temperature controller with temperature sensor
for fully modulating temperature control.
PXVC-L
Level controller for fully modulating applications.
Level sensor not included.
PXVC-P
Pressure controller with pressure transducer for
fully modulating pressure control.
PXVC-PT
Direct expansion or super heat controller for fully
modulating applications.
PXVC-DX
Direct expansion or super heat controller for fully
modulating applications.
RDR Remote digital readout displays valve position
WTE Watertight Enclosure (NEMA4 for above controller)
OPTIONAL EQUIPMENT
MCT Manual Control Tool
HUPS
Power Backup System: Uninterruptable Power
Supply and DC power supply for up to 3 valves
75-1321 Cable set 2m long
75-1329 Cable set 5m long
1-1/4˝ (32) 1-1/4˝ 3/4˝, 1˝ 1-3/8˝
1-1/2˝ (40) 1-1/2˝ 2˝ 1-5/8˝
2˝ (50) 2˝ 1-1/2˝ 2-1/8˝
3˝ (80) 3˝ - 3-1/8˝
4˝ (100) 4˝ - 4-1/8˝
PSU2
Compact Power Supply
(100-240VAC: 24VDC) for above enclosure
75-3517 MCV Dongle Conversion Cable
NOTE: For PXVC product bulletin see www.HANTECH.com
To Previous Page
Loading...
Need help?
General
