CH8888888: Select CH8 as trigger signal
: Select CH7 as trigger signal
: Select CH6 as trigger signal
: Select CH5 as trigger signal
CH7
CH6
CH5
CH1: Select CH1 as trigger signal
CH2: Select CH2 as trigger signal
CH3: Select CH3 as trigger signal
CH4: Select CH4 as trigger signal
Slope: Set the slope to Rising (+) or Falling (-).
Rising:
T
rigger on rising edge
Falling: Trigger on falling edge
The user can also change the trigger setting on trigger panel in sidebar
.
8
49
Hantek 1008
DIGITAL OSCILLOSCOPE
To Next Page
Loading...
