Click "Untility" in main menu.
Calibration
Utility/Function
The self calibration routine lets you optimize the oscilloscope signal path for maximum
measurement accuracy
.
Y
ou can run the routine at any time but you should always run
the routine if the ambient temperature changes by 5
deg or more. For accurate calibra
-
tion, power on the oscilloscope and wait twenty minutes to ensure it is warmed up. T
o
compensate the signal path, disconnect any probes or cables from the input connectors.
Then, access the
“Utility -> Calibration” option and follow the directions on the screen.
The self calibration routine takes about several minutes.
52
Hantek1008
To Next Page
Loading...
