Logic Analyzer
Hantek4032L
3.2 Bus Panel
Click the menu “Setup”-> “Bus Setup…” to open the dialog.
Hantek4032L has 32 signals channels, A0 ~A15, B0~B15. You can assign the
parts of them to some bus.
The list box contains all of the bus; you can add or delete the bus.
For example: Assign a bus “My Bus” which has 7 signals “A0, A1, A2, A3, A4,
A5 and A6”.
1. Click the button “Add”. Then a new bus is added to the list.
2. Click the pane under the A0, A1, A2, A3, A4, A5, and A6. If the pane is filled
of red, it means you have add the signal to the bus.
User’s Manual 18
To Next Page
Loading...
