Logic Analyzer
Hantek4032L
User’s Manual 38
Cleaning and maintenance
Cleaning
In order to maintain the cleanliness of equipment, you need to check whether
the channels are dusty or not. Please clean the out surface of the equipment
follow these matters.
1. Use velvet cloth contact the surface of the equipment.
2. Pease do not use any corrosive or chemistry.
Caution: Please make sure the equipment is dry enough before going to work.
Avoid mangling the equipment or hurting body because of water!
Maintenance
Don’t put the equipment under the sun for a long time. Put it in wind to the best
of one's abilities
Caution
In order to not mangle the equipment, you should not put it in fog, water or
impregnate.
To Previous Page
Loading...
