Remote control
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 Quick guide
21
Figure 8.1 Command window81
2. Software
The user can use the upper computer software to control the instrument remotely. It is
recommended to use the software provided by Hantek. You can go to Hantek website
(http://www.hantek.com) to download the software.
Steps:
⚫ Download and install the IO software
Click the following website to download the latest IO software:
https//www.keysight.com/main/software.jspx?Ckey = 2175637 & lc = chi&cc = CN&nid = -
11143.0.00 & id = 2175637
Double-click the application to start the installation. Install step by step as prompted. The
installation process may take several minutes.
After the installation is complete, the running IO software can be found in the lower right
corner of the screen.
⚫ Install the software, open the software.
Figure 8.2 Software window82
To Next Page
Loading...
