Remote control
EN
Tablet1000 Quick guide Copyright © Qingdao Hantek Electronics Co., LTD
20
8 Remote control
There are two main ways to control the instrument remotely:
1. Custom programming
The user can write programs to control the instrument with SCPI (Standard Commands
for Programmable Instruments). For command and programming details, please refer to
the Programming Manual of this series.
Steps:
⚫ Download and install the IO software
Click the following website to download the latest IO software:
https//www.keysight.com/main/software.jspx?Ckey = 2175637 & lc = chi&cc = CN&nid = -
11143.0.00 & id = 2175637
Double-click the application to start the installation. Install the instrument step by step as
prompted. The installation process may take several minutes.
After the installation is complete, the running IO software can be found in the lower right
corner of the screen.
⚫ Open IO - > Connection Expert - > Interaction IO, open the command window, and input
commands with reference to the Programming Manual.
To Next Page
Loading...
Need help?
General
