To Next Page

To Previous Page

Safety requirements

probe. Please be careful to avoid scratching the smooth display filter material.

2) Using a soft cloth soaked with water to clean the oscilloscope. For more thoroughly

clean, use 75% isopropyl alcohol aqueous solvent

Note:

To avoid damage to the oscilloscope or the surface of the probe, please do not

use any corrosive reagent or chemical cleaning reagent.

Warning:

Before repowering, please make sure the instrument is completely dry, to avoid

electrical short circuit or even personal injury caused by moisture.

1.6 Environmental precautions

The following sign indicates that this product conforms to the requirements set out by the

WEEE Directive 2002/96/EC.

Equipment recycling:

Producing the instrument requires the extraction and use of natural resources. Some

substances contained in the instrument may be harmful to the environment or human

health if the product is not disposed of properly. To avoid the release of harmful

substances into the environment and reduce the use of natural resources, it is

recommended that appropriate methods be used to recycle this product to ensure that

most of the materials can be correctly reused.

Hantek TO1154D Quick Guide

Other manuals for Hantek TO1154D