Hantek TO1252D - Product Introduction; Front Panel; Figure 4.5 Adjust the Probe; Figure 4.6 Front Panel

Quick start
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
15
If necessary, repeat Step 3. The adjustment method is shown in the following figure.
Figure 4.5 Adjust the probe4
4.4 Product introduction
This section introduces the front, rear, side panel and the main interface of the
oscilloscope.
4.4.1 Front Panel
Figure 4.6 Front panel
1. Label
Hantek trademark + product model.
2. Virtual keys