Signal source
EN
Tablet1000 User manual Copyright © Qingdao Hantek Electronics Co., LTD
72
4. Enter the Signal source menu. Select Arb1~Arb4, call up ARB files to output
waveform. The AFG port will output waveform.
Method 2
1. Double-click the WaveEditor_Setup_Tablet1000 icon to open the software.
2. Plug in USB storage.
3. Select a waveform file or draw an arbitrary waveform. Click Menu and choose
Export to ARB file, save the file to your computer or elsewhere.
4. Copy the ARB files saved to your computer to the USB storage device. The USB
storage device can save only one ARB file at a time, and the name of the ARB file
can only be dds.arb.
5. Plug the storage device with ARB files into the machine. Enter the signal source
interface and select one among Arb1 ~ Arb4. Hold down until the message “Call out
successfully” is displayed. The AFG port will output the waveform.
To Next Page
Loading...
