Hanwell MS1000 - Readings Are Incorrect

MS1000 Control System
Installation Guide
GD6063-1 Page 26 of 30
hanwell.com
9.3 Readings are incorrect
Possible Causes Action to Take
 Incorrect wiring between
the MS1000 and the 3rd
party system.
Check the wiring on all faulty sensors.
 Incorrect scaling on the
3
rd
party system’s
software.
Check the scale used on the 3
rd
party system matches the
scale being supplied by the MS1000 system. This will have
been specified when the MS1000 was ordered.