MS1000 Control System
Installation Guide
hanwell.com
Page 5 of 30 GD6063-1
2 MS1000 Control System Configuration
There are two main options for configuring the MS1000 Control System:
Standalone Solution
Monitoring and Control Solution
2.1 Option 1 - Standalone Solution
Radio sensors transmit directly back to the MS1000 Control Unit via either a standalone
Receiver connected to the MS1000 or a receiver incorporated into the MS1000 Control
Unit.
The MS1000 Control Outputs are sent to, for example, a 3rd Party Building Management
System (BMS).
Figure 1 - Stand Alone Solution Schematic
To Next Page
Loading...