HANYOUNG NUX TD510 Series - Button Operation; How to Control Numeric Input Panel

Programmable Temperature & Humidity Controller
14
※ If the button is not active or can't be set, it sounds buzzer(beep) and doesn't run.
2. Button operation
Run button Runs corresponding operation immediately.
Select button Selects one of items.
Input box
Displays ansets numbers and characters.
Press it to display the numeric or character input panel.
Displays parameter names and setting ranges.
Displays setting values.
Registers setting values.
Remove the last digit of setting value.
Remove the entire setting value.
Cancel setting and hide input panel.
3. How to control numeric input panel
Fig. 6) Numeric input panel
※ If a setting range is exceeded, it sounds buzzer(beep) and doesn't run.