HANYOUNG NUX TD510 Series - Program Control and Patterns; Pattern Setting

Programmable Temperature & Humidity Controller
44
Program
1) Change the pattern No. (Pattern 1 - 100)
2) Move by 5 segment. If a segment is selected, it is changed to Insert/Delete button.
3) Pattern graph is displayed.
4) Select a segment. Selected segment can be inserted/deleted.
1. Pattern setting
①
②
③
④
Fig. 65) Pattern setting
Fig. 66) Pattern insertion/deletion
To control measurement with change of setting values over time. Program control parameters can be
set in this screen.
Fig. 63) Main menu Fig. 64) Program menu