HANYOUNG NUX TD510 Series - System Settings and Configuration; Accessing System Settings

51
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
5. Time signal setting
Up to 20 time signals can be set.
1) Set OFF time. Time signal is on after waiting for defined time from the start point of segment.
2) Set ON time. Time signal is on during defined time from the ON point of segment.
[Time signal parameter]
Parameter Setting range Default
OFF Time 0-9999 [M] 0
ON Time 0-9999 [M] 0
● Time signal operation
Fig. 74) Time signal
Fig. 75) Time signal operation
ON
TS1
SEGMENT
OFF
(N-1) SEG TIME(N+1) SEG TIMEN SEG TIME
ON Time
ON
TS2
SEGMENT
OFF
(N-1) SEG TIME(N+1) SEG TIMEN SEG TIME
ON
Time
OFF Time
ON
TS3
SEGMENT
OFF
(N-1) SEG TIME(N+1) SEG TIMEN SEG TIME
ON Time
ON
TS4
SEGMENT
OFF
(N-1) SEG TIME(N+1) SEG TIMEN SEG TIME
ON
Time
OFF
Time
1. TS1
1) Seg Time ≥ OFF Time + ON Time
2) OFF Time = 0
2. TS2
1) Seg Time ≥ OFF Time + ON Time
2) OFF Time ≠ 0
3. TS3
1) Seg Time ＜ OFF Time + ON Time
2) OFF Time = 0
4. TS4
1) Seg Time ＜ OFF Time + ON Time
2) OFF Time ≠ 0