HANYOUNG NUX TD510 Series - System Alarm Settings

Programmable Temperature & Humidity Controller
64
6 ON/OFF signals can be set for each channel.
1. L.SV
- Set lower limit of ON/OFF signal operation.
2. M.SV
- Set median of ON/OFF signal operation.
3. H.SV
- Set upper limit of ON/OFF signal operation.
4. LU
- Set lower limit offset of ON/OFF signal operation.
5. HD
- Set upper limit offset of ON/OFF signal operation.
▶ Temperature setting
5. ON/OFF signal
Parameter Setting range Default
L.SV
Temperature EU (0 ~ 100)
0.0
M.SV 0.0
H.SV 0.0
LU
Temperature EUS (0 ~ 100)
0.0
HD 0.0
[Temperature ON/OFF signal]
Fig. 105) ON/OFF