Programmable Temperature & Humidity Controller
2
Before starting
1. Checking of components
Thank you for purchasing Hanyoung Nux programmable temperature controller(Model: TD510).
This programmable temperature controller(Model: TD510) is a unit to control temperature consisting
of display and control. The display can be attached to a panel or VESA-mounted and is
connected to the control for communication. The control consists of power, control, and input/
output modules and can be fixed on DIN rail or attached on a panel using screws.
The operation manual describes product functions, how to install, cautions, and how to use. Read
and understand this document before starting the product.
Make sure that this operation manual will be delivered to an end user and kept in an accessible
location (This operation manual may be subject to changes for improvement and functional
changes without prior notice).
First of all, check the specifications referring to your order and see if there is any exterior damage or
missing component.
▶ Component
Display(TD510-1) Power module(TM-PWR) Control module(TD510-MAIN)
Input module(TM-DI) Output module(TM-DO) Input/output module(TM-DIO)
Communication
cable(1.5 m)
Bracket 4EA
250-Ω resistor
2EA
3P communication
Connector
SD card
Operation
manual
To Next Page
Loading...
