Programmable Temperature & Humidity Controller
40
5. Event
Screen to show event or error history.
Displays history of up to 80 events.
▶ Event
Event message Description
Power on TD510 is turned on.
Power off TD510 is turned off.
SD card inserted SD card is recognized.
SD card removed SD card is removed.
Constant-value operation started (Manual)
Constant-value operation is started with Run button.
Constant-value operation started (Communication)
Constant-value operation is started by communication.
Constant-value operation started (DI1)
Constant-value operation is started with contact input(DI1).
Constant-value operation stopped (Manual)
Constant-value operation is stopped with Stop button.
Constant-value operation stopped (Communication)
Constant-value operation is stopped by communication.
Constant-value operation stopped (DI1)
Constant-value operation is stopped with contact input(DI1).
Constant-value operation stopped (Error)
Constant-value operation is stopped due to an error.
Constant-value operation normal stop
Constant-value operation is normally stopped.
Program operation started (Manual) Program operation is started with Run button.
Program operation started (Communication)
Program operation is started by communication.
Program operation started (DI1) Program operation is started with contact input(DI1).
Program operation stopped (Manual) Program operation is stopped with Stop button.
Program operation stopped (Communication)
Program operation is stopped by communication.
Program operation stopped (DI1) Program operation is stopped with contact input(DI1).
Program operation stopped (Error) Constant-value operation is stopped due to an error.
Program operation normal stop Program operation is normally stopped.
Hold function started (Manual) Hold is started with Hold button.
Hold function started (Communication) Hold is started by communication.
Hold function started (DI2) Hold is started with contact input(DI2).
Hold function stopped (Manual) Hold is stopped with Hold button.
Hold function stopped (Communication) Hold is stopped by communication.
No. Description
1 Go to other pages. History of up to 80 items can be checked.
2 Initialize event history. (enabled when it is not being saved)
3 Save event history to SD card. (enabled when it is not being saved)
Fig. 61) Event history
①
③②
To Next Page
Loading...
