41
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
Event message Description
Hold function stopped (DI2) Hold is stopped with contact input(DI2).
Step function operation (Manual) Step is conducted with Step button.
Step function operation (Communication) Step is conducted by communication.
Step function operation (DI3) Step is conducted with contact input(DI3).
Ch.1 auto tuning started (Manual) Auto tuning is started with Ch.1 auto tuning button.
Ch.1 auto tuning started (Communication) Ch.1 auto tuning is started by communication.
Ch.1 auto tuning stopped (Manual) Auto tuning is stopped with Ch.1 auto tuning button.
Ch.1 auto tuning stopped (Communication) Ch.1 auto tuning is stopped by communication.
Ch.1 auto tuning normal stop Ch.1 auto tuning is normally stopped.
Ch.2 auto tuning started (Manual) Auto tuning is started with Ch.1 auto tuning button.
Ch.2 auto tuning started (Communication) Ch.1 auto tuning is started by communication.
Ch.2 auto tuning stopped (Manual) Auto tuning is stopped with Ch.1 auto tuning button.
Ch.2 auto tuning stopped (Communication) Ch.1 auto tuning is stopped by communication.
Ch.2 auto tuning normal stop Ch.1 auto tuning is normally stopped.
Constant-value operation started (HOT) Constant-value operation is started with recovery of power failure.
Constant-value operation started (Schedule)
Constant-value operation is started with schedule function.
Program operation started (HOT) Program operation is started with recovery of power failure.
Program operation started (Schedule) Program operation is started with schedule function.
SD card save started It starts to save to SD card.
SD card save stopped It stops to save to SD card.
SD card save stopped (No memory) It stops to save to SD card because it is removed.
SD card save stopped (Capacity exceeded)
It stops to save to SD card because the capacity is exceeded.
SD card save stopped (Number of files exceeded) It stops to save to SD card because the number of generated files is exceeded (up to 522).
Memory save started It starts to save to internal memory.
Memory save stopped It stops to save to internal memory.
Memory save stopped (Capacity exceeded)
It stops to save to internal memory because the capacity is exceeded.
Memory save stopped (Number of files exceeded)
It stops to save to internal memory because the number of generated files is exceeded (up to 522).
Internal memory initialized Internal memory is initialized.
Parameter initialized Parameter is initialized.
SD card parameter uploaded (PTN) Pattern data is uploaded to SD card.
SD card parameter uploaded (PARA) Parameter is uploaded to SD card.
SD card parameter uploaded (ALL) Pattern data and parameter are uploaded to SD card.
Parameter initialized (SUM ERROR) Parameter is initialized due to an error.
Event history initialized Event history is initialized.
Error history initialized Error history is initialized.
User logo uploaded User logo is uploaded.
Ch.1 constant-value operation started (Manual)
Ch.1 constant-value operation is started with Run button.
Ch.1 constant-value operation started (Communication)
Ch.1 constant-value operation is started by communication.
Ch.1 constant-value operation started (DI1) Ch.1 constant-value operation is started with contact input(DI1).
Ch.1 constant-value operation stopped (Manual)
Ch.1 constant-value operation is stopped with Stop button.
Ch.1 constant-value operation stopped (Communication)
Ch.1 constant-value operation is stopped by communication.
Ch.1 constant-value operation stopped (DI1)
Ch.1 constant-value operation is stopped with contact input(DI1).
Ch.1 constant-value operation stopped (Error)
Ch.1 constant-value operation is stopped due to an error.
Ch.1 constant-value operation normal stop Ch.1 constant-value operation is normally stopped.
Ch.1 program operation started (Manual) Ch.1 program operation is started with Run button.
Ch.1 program operation started (Communication)
Ch.1 program operation is started by communication.
To Next Page
Loading...
