43
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
Displays history of up to 40 errors.
▶ Error
Error message Description
[Ch.1] Sensor disconnected Ch.1 sensor is disconnected.
[Ch.1] ADC error Ch.1 ADC converter has an error.
[Ch.1] Calibration error Ch.1 calibration is incorrect.
[Ch.1] input connection error Ch.1 input connection is incorrect.
[Ch.2] Sensor disconnected Ch.2 sensor is disconnected.
[Ch.2] RJC error Ch.2 ADC converter has an error.
[Ch.2] ADC error Ch.2 calibration is incorrect.
[Ch.2] Calibration error Ch.2 input connection is incorrect.
[Ch.2] input connection error Ch.2 input connection is incorrect.
I/O[nn] connection error I/O[nn] is not connected.
D.I.nn found Contact input(D.I nn) is found.
D.I.nn cancelled Contact input(D.I nn) is cancelled.
P.alarm nn found Pattern alarm(P.alarm nn) is found.
P.alarm nn released Pattern alarm(P.alarm nn) is released.
S.alarm nn found System alarm(S.alarm nn) is found.
S.alarm nn released System alarm(S.alarm nn) is released.
③②
①
No. Description
1 Go to other pages. History of up to 40 items can be checked.
2 Initialize error history. (enabled when it is not being saved)
3 Save error history to SD card. (enabled when it is not being saved)
Fig. 62) Error history
To Next Page
Loading...
