HFS6801+ Installation and Operation Manual 3
Chapter 1: Introduction
Main Features
Important HFS6801+ features include the following:
• Inputs:
• One serial digital SMPTE 292M/SMPTE 259M SDI input
• Genlock (composite or Tri-Level sync)
•Outputs:
• Two serial digital SMPTE 292M/SMPTE 259M SDI reclocked
outputs
• Four synchronized serial digital SMPTE 292M/SMPTE 259M
SDI reclocked outputs
• One DATA I/O signal for tracking audio processing
• Capability for operating the following video standards:
• 1080i (interlaced), 25/29.97/30 Hz
• 1080p (progressive), 23.98/24/25/29.97/30 Hz
• 720p (progressive), 50/59.94/60 Hz
• Standard definition 525/625
• Auto-detect or user-forced input video standard
• 10-bit video processing
• Digital equalization (supports Belden 8281 and newer, thin coax
cables like Alcatel SD02)
• VANC and HANC sample passing capability
• Clean handling of hot switch on input
• Up to 8 frames less 2 lines of video delay for 1080i/1080p
standards, 16 frames less 2 lines for 720p standards, and 1 frame for
525/625 standards
• Pass, black, and freeze loss of video modes
• Video processing amplifier with luminance gain, luminance offset,
and chrominance gain controls
• Shadowed / restored parameter settings when switching video
standards
• Card-edge control
• Serial and Ethernet remote control and monitoring
To Next Page