HFS6801+ Installation and Operation Manual 51
Appendix A: Communication and Control Troubleshooting Tips
Hardware Communication and Control Issues
• “Frames Fail to Communicate with the PC after a Power Failure”
on page 51
• “Module Does Not Seem to Work” on page 51
Frames Fail to Communicate with the PC after a Power
Failure
You must exit the software and restart after the frame recovers from its
power failure. To restore communications between the PC and the
frames, ensure that the frames have three or more minutes to recover
from the power failure before you exit the application and restart the
PC.
Module Does Not Seem to Work
Although the following troubleshooting tips may seem obvious, please
take the time to ensure the following:
• All appropriate rear connections are securely made
• The board is securely installed (with no bent pins)
• The frame is turned on
Contacting Customer Service
We are committed to providing round-the-clock, 24-hour service to our
customers around the world. Visit our Web site at
/www.broadcast.harris.com/leitch
and click on Support > Technical
Support for information on how to contact the Customer Service team
in your geographical region.
To Next Page
Loading...