HFS6801+ Installation and Operation Manual23
Chapter 3
Operation
Overview
This chapter describes how to operate the HFS6801+ using card-edge
controls only. See the following documents for information on how to
operate this product remotely:
• +Pilot Lite User Manual for serial control interface
• CCS Pilot, CoPilot, Navigator, or RCP-CCS-1U Remote Control
Panel manual for Ethernet control interface
The following topics are discussed in this chapter:
• “Operating Notes” on page 24
• “Parameter Availability based on Operating Mode” on page 25
• “Changing Parameter Settings” on page 26
• “Setting HFS6801+ Control Parameters” on page 28
• “LEDs and Alarms” on page 35
To Next Page
Loading...