33Chapter 2 | Installation and Setup
InfoCaster R2100 Hardware Installation Manual
6 To set up multi head or spanning VGA output:
a Click on monitor icon 2 in the preview window
b Select your desktop from the drop-down list.
c Right-click on Desktop 2 and choose Stretch Main Horizontally Onto
Monitor.
Figure 2-22. Set Up Multi Head or Spanning Output
d Click Yes in the Displays Manager Notification window to accept the
changes. The first monitor appears extended in the preview window.
e Click Apply to accept the changes.
7 To set up Edit & Playback VGA output:
a Select your desktop area from the drop-down list.
b Right-click on the second desktop and choose Extend Main Onto
Monitor.
Figure 2-23. Set Up Edit & Playback Output
c Click Apply to accept the changes.
8 Click on OK and close the Catalyst Control Center and the Display
Properties dialog.
To Next Page
Loading...