42 Chapter 2 | Installation and Setup
InfoCaster R2100 Hardware Installation Manual
5 After you make your audio connections, select a speaker setup from the
speaker drop-down list. See
Table 2-5 on page 43 for the function of the
audio ports for the different speaker setups.
Figure 2-33. Speaker Setup
6 Click on the Play button located at the bottom of the speaker setup window
to test the speaker output.
During playback, the speakers individually output a test tone according to
your selected configuration. At this time, you can make any adjustments to
your setup.
7 Click the Play button to stop the speaker test.
8 When you finish configuring your audio, click OK to close the control
panel.
To Next Page
Loading...