______________________________________________HARRIS
888-9058-001
WARNING: Disconnect and lockout AC primary power prior to servicing
74
IMPORTANT:
To run eCDi™ requires that the Java 2 Runtime Environment plug-in be loaded.
If the computer used to access the eCDi™ does not have this plug-in installed, it
will be automatically downloaded from the eCDi™ and the screen in Figure 3-5
will appear asking if you want to load the plug-in. Select Yes and then follow the
on-screen instructions to load the plug-in. This will not require a computer restart
and will only happen the first time a computer logs on to eCDi™.
Figure 3-5 Java 2 Runtime Environment Plug-in
To get the computer to use the latest plug-in, it is sometimes necessary to unload all
previous versions of the Java Runtime Environment using Add/Remove programs in the
Windows Control Panel. Once all versions are removed, accessing the eCDi™ will
automatically load it again.
STEP 3:
Click on “Service eCDi” as shown on the left
side of the login screen in Figure 3-4. This
provides access to the Configure and Upgrade
options. Click on Configure. This will bring up
the Configuration Login screen in Figure 3-6.
To Next Page
Loading...
