Hasler WJ20 - Page 80

HASLER Setup Mode Section 11
Page 11 - 14 WJ20 06/2003
< SETUP >
< BLIND DIAL >
0
BLIND DIAL
0
TONE DETECT
OFF
BLIND DIAL
5
Blind Dial
A BLIND DIAL facility is available to set a delay before dialing if
there is no dial tone on your phone system.
Press and scroll (< >) to
SETUP:
Press , the first Set Up option is displayed.
Scroll (< >) to the Blind Dial option and press . The
current Blind Dial setting is
displayed.
To change the Blind Dial number (delay in seconds), enter the
new the new number using the
numeric keypad.
Press to confirm.
If the setting is incorrect press and start again.
Press twice to return to the Ready Mode.