Hawk Gladiator - Remote Probe Dimensions; Smart Probe Dimensions

7
Dimensions
Gladiator Gen 3 Microwave Series
MD Series Weldments and Windows
Weldment with UHMW or PTFE Windows
The Weldment is welded to the vessel. The Window locks into the weldment using a locking ring.
For Approval Option 2D Installations. Consult Safety Instructions for critical details.
WeldmentUHMW / PTFE Window Assembled Piece
A
B
C D
E
P.C.D.
10°
N x M5 x 6.5mm (0.25”)
22mm (0.87”)
5mm
(0.2”)
19mm (0.75”)
F
H
G
Part No
1
. Window
Material
A B C D E P.C.D No.
Holes
mm in mm in mm in mm in mm in mm in
MD3-X UHMW 122 4.8 93 3.7 77 3.0 115 4.5 90 3.5 99 3.9 4
MD4-X UHMW 148 5.8 120 4.7 102 4.0 141 5.6 116 4.6 125 4.9 6
MD5-X UHMW 203 8.0 175 6.9 153 6.0 196 7.7 171 6.7 180 7.1 6
MD6-X PTFE 122 4.8 93 3.7 77 3.0 115 4.5 90 3.5 99 3.9 4
MD7-X PTFE 148 5.8 120 4.7 102 4.0 141 5.6 116 4.6 125 4.9 6
MD8-X PTFE 203 8.0 175 6.9 153 6.0 196 7.7 171 6.7 180 7.1 6
1
X = Weldment Material Selection
Part No
1
. Window
Material
F G H P.C. D No.
Holes
mm in mm in mm in mm in
MD3-X UHMW 89 3.5 76 3.0 4 1.6 99 3.9 4
MD4-X UHMW 115 4.5 102 4.0 4 1.6 125 4.9 6
MD5-X UHMW 170 6.7 153 6.0 4.5 1.8 180 7.1 6
MD6-X PTFE 89 3.5 76 3.0 4 1.6 99 3.9 4
MD7-X PTFE 115 4.5 102 4.0 4 1.6 125 4.9 6
MD8-X PTFE 170 6.7 153 6.0 4.5 1.8 180 7.1 6
1
X = Weldment Material Selection