Hawx Pro DG - Key Definitions and Operation; Master Transmitter Components

Key Denitions & Operation
Master Transmitter
The Master Transmitter sends a signal to activate the e-collar which delivers a harmless stimulation to the
dog. The transmitter is waterproof and submersible, it also incorporates a 2.4 GHZ receiver for Dog & Gun
remote control. All transmitters are Dog & Gun ready, so that Dog & Gun transmitters can be added at any
time. The unit comes set on factory mode default (Hunter mode 11).
Front
1. Selector Dial
• Provides multiple stimulation levels (1-6), so you can match the correction to your dog’s temperament.
“N” (no stimulation) or “B” (Tone or Vibrate) or (beeper) setting, depending on mode and setting.
2. Dual Function Indicator light
• Indicates that a signal has been sent to activate a command on the receiver. In
addition serves as a low-battery indicator.
3. Toggle Switch
• This switch is factory set to control two collar receivers.
Mode 11 – Hunter Mode (Default)
4. Upper Button
• This button is factory set to deliver
Continuous stimulation.
5. Lower Button
• This button is factory set to deliver
Momentary stimulation or “nick”.
6. Side Button
• This button is factory set to deliver
Tone.
Note: All buttons’ functions can be
changed based on mode chosen. (See
pages 19-22)
6