T210
SAFETY INSTRUCTIONS
4
Qualified personnel means persons entrusted with siting, mounting, starting up and oper
ating the product who possess the appropriate qualifications for their function.
Accident prevention
According to the prevailing accident prevention regulations, once the torque transducers
have been mounted, a covering agent or cladding has to be fitted as follows:
S The covering agent or cladding must not be free to rotate.
S The covering agent or cladding should prevent squeezing or shearing and provide
protection against parts that might come loose.
S Covering agents and cladding must be positioned at a suitable distance or be so ar
ranged that there is no access to any moving parts within.
S Covering agents and cladding must still be attached even if the moving parts of the
torque transducer are installed outside peoples' movement and working range.
The only permitted exceptions to the above requirements are if the various parts and as
semblies of the machine are already fully protected by the design of the machine or by
existing safety precautions.
To Next Page
Loading...