T210
MARKINGS USED
6
Product literature
To avoid risks, all precautions, warnings, and operating instruc
tions contained in the product literature, especially in the instruc
tions for use, must be carefully read, fully understood and fol
lowed before installing, commissioning, and/or using the
product, and before performing any maintenance on the product.
Failure to comply may result in risks due to improper use of the
product.
Marking in accordance with the requirements of SJ/T 11364-2014 and SJ/T
11363-2006 (“China RoHS-2”)
Marking for products containing hazardous substances in quan
tities above the maximum concentrations.
Assembly
Hazardous substance / 有害物质
Lead
(Pb)
Merc
ury
汞
(Hg)
Cadmi
um
(Cd)
Hexavalent
chromium
六
(Cr (VI))
Poly
brominated
biphenyls
多溴联苯
(PBB)
Polybrominated
diphenyl ethers
多溴苯
(PBDE)
Measuring body/
shaft
O O O O O O
Housing O O O O O O
Electronic com
ponents/PCB
O O O O O O
Small parts (e.g.
screws, pins,
receptacles)
X O O O O O
This table was compiled in accordance with the requirements of SJ/T 11364.
本表格照SJ/T 11364规定的规定编制。
O: Signifies that the amount of hazardous substance in question within the homoge
neous substances of the assembly is less than the limit value according to
GB/T 26572.
该有毒有害物质在该部件所有均质材料中的含量均在
GB/T 26572规定的。
X: Signifies that the amount of at least one of the hazardous substances within the ho
mogeneous substances of the assembly is above the limit value according to GB/
T 26572.
该有毒有害物质至少在该部件的某一均质材料中的含量超出
GB/T 26572规定。
To Next Page
Loading...