Configuration
Configuring interfaces in setting mode
DMP41 A03470_07_E00_00 HBM: public 93
Information
The Ethernet function is only available for operation via the DMP41 (not for
operation via PC).
► Press Ethernet.
► Select DHCP OFF or ON.
OFF :
You can enter values for “IP address, Network mask and Gateway”
ON :
The values for “IP address”, “Network mask” and “Gateway” are
assigned to the DMP41 by a DHCP server.
The values for “IP address”, “Network mask” and “Gateway” are network-
dependent.
To Next Page
Loading...
