HBS ARC 800 - Technical Data

17©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – full or partial reproduction subject to prior approval of the manufacturer
5 Technical Data
5 Technical Data
Stud welding unit ARC 800
for ARC stud welding according to current standards
Welding range Dia. 2 to 10 mm, M3 to M12 (Type RD)
Welding material Mild steel, stainless steel
Welding rate 7 to 17 studs/min
(depending on application and stud dia.)
Welding current 800 A
Welding time 5 - 1 000 ms
Primary power 400 V, 3 Phasen, 50/60 Hz, 35 AT
(alternative input voltages available)
Primary plug 32 A (at 400 V mains)
Power source Transformer/Rectier
Cooling type F (temperature controlled cooling fan)
IP Code IP 23 (also permits operation outdoors)
Ambient temperature limits 0 °C to 40 °C
Dimension L x W x H 470 x 230 x 220 mm (without handle)
Weight 40 kg