41
Footswitch Control Tab:
Rec/Play/Dub After Record: This setting determines what HeadRush Looperboard will do after
an initial layer is recorded on a looper track. When set to Play, the looper track will begin
playback after the initial layer is recorded. When set to Overdub, the looper track will
immediately start overdubbing after the initial layer is recorded.
Rec/Play/Dub After Stop: This setting determines what HeadRush Looperboard will do when a
track’s Rec/Play/Dub footswitch is pressed for a stopped track. When set to Play, the looper
track will begin playback of the track. When set to Overdub, the looper track will begin
overdubbing to the track.
Rec/Play/Dub Hold Function: This setting determines what HeadRush Looperboard will do
when a track’s Rec/Play/Dub footswitch is held for more than 1.5 seconds. This hold function
can be assigned to Peel or Clear the track.
Stop/Undo Hold Function: This setting determines what HeadRush Looperboard will do when a
track’s •Stop/-Undo footswitch is held for more than 1.5 seconds. This hold function can be
assigned to Undo/Redo or Clear the track.
Important: If a track only has 1 layer, performing the undo function will clear the track, and the
layer cannot be restored.
Stop/-Undo Function: This setting determines whether the individual •Stop/-Undo footswitch
functions will perform its action when the footswitch is initially pressed (On Press), or when it is
released (On Release).
Start/Stop All After Stop: This setting determines what happens after you use the Start/Stop
All footswitch to stop all of your tracks and then press it again. When set to Return, all tracks
will start at the beginning of the loop. When set to Pause, all tracks will restart from where you
initially hit the Start/Stop All footswitch to stop all tracks.
Note: This parameter only applies when using Fixed, Serial or Free Looper Modes.
Start/Stop All Function: This setting determines what HeadRush Looperboard whether the
Start/Stop All footswitch function will perform its action when the footswitch is initially pressed
(On Press), or when it is released (On Release).
To Next Page
Loading...
