HEADRUSH Looperboard - Page 44

44
External MIDI Control: This setting determines whether HeadRush Looperboard will respond to
incoming MIDI CC and MIDI Note messages. When set to On, HeadRush Looperboard will
receive MIDI CC and MIDI Note messages from an external device on the selected channel.
When set to Off, HeadRush Looperboard ignore incoming MIDI CC and MIDI Note messages.
External MIDI Channel: This setting determines which channel that HeadRush Looperboard will
listen to when set to respond to incoming MIDI CC and MIDI Note messages. To change the
MIDI Channel, tap the field and then turn the encoder to select the channel, 1–16 or Omni (all
channels).
Info Tab:
On this tab, you can view the currently installed firmware version. You can also access
HeadRush Looperboard’s EULA by tapping the License field.