Heatmiser Touch Series - Edit Comfort Levels

18
Model: Touch Carbon
Edit Comfort Levels
This thermostat oers three program mode options; Weekday/Weekend, 7 Day and
24 Hour programming. There is also the option to use the Touch Carbon as a manual
thermostat.
Touch Carbon is supplied with comfort levels already factory programmed, but
these can be changed easily. The default times and temperature settings are;
07:00 - 21°C (Wake) 09:00 - 16°C (Leave) 16:00 - 21°C (Return) 22:00 - 16°C (Sleep)
Unused levels must be set to --:-- so that the Touch Carbon will skip these and
continue on to the next programmed time.
For Weekday/Weekend programming, the four comfort levels are the same for Mon-Fri, but can
be dierent for Sat-Sun. For 7 Day programming each day of the week can have four dierent
comfort levels. In 24 Hour mode all days are programmed with the same comfort levels.
• To program the ‘Comfort Levels’, press the ‘EDIT’ key .....................................................
• Use the ‘DAY’ key to select day/period of week (the selection will ash) .............
• Press ‘NEXT’ to conrm selection .............................................................................................
‘WAKE’ will now ash and the current time and temperature setting will be shown.