Heatmiser Touch Series - Timer Advance

40
Model: Touch Carbon
Timer Advance
Advance
Time Remaining
Output Status
Level
Advanced Until
This feature allows the next ’Switching time level’ setting to be brought forward and
become active before its pre-programmed time. Note: Multiple advances aren’t allowed.
To enable ‘Advance’
• Press the ‘ADVANCE’ key once ..........................................................................................
The ‘ADVANCED UNTIL’ time and the output status will now be displayed.
• Press ‘DONE’ to conrm .......................................................................................................
To cancel ‘Advance’
• Press the ‘ADVANCE’ key once, then press ‘CANCEL’ ..................................................