Heatmiser Touch Series - View Accessories

16
Model: Touch Carbon
View Accessories
Example showing ‘Wireless Air Sensor’.
Current Status
Accessory ID Number
Low Battery Warning
Press and hold the key for 3 seconds to turn o the display ............................
• Press the ‘Setup’ key..........................................................................................................
• Press ‘Down’ key until you see the letter ‘A’ displayed at the top of the
screen then press ‘NEXT’.......................................................................................................
• Use the ‘Up/Down’ arrow keys to scroll through the list of
attached accessories.........................................................................................................
A ‘Wireless Air Sensor’ will show the current temperature. The ‘Window/Door Contact’
will display current open or closed status by showing ‘OP’ = Open, or ‘CL’= Closed.
If the Touch Carbon loses connection with an accessory, the display will show “--”.
A battery warning symbol will be appear when an accessory reports low power.
When this happens change the battery in the accessory as soon as possible.