Heatmiser Touch Series - Temperature Hold

21
Temperature Hold
Touch Series
The temperature hold function allows you to manually override the current operating
program and set a dierent temperature for a desired period.
• Press the ‘Hold’ key once...................................................................................................
• Use the ‘Up/Down’ keys to set the desired ‘Hold’ time (Hours)
then press ‘NEXT’ .....................................................................................................................
Minutes will now ash.
• Use the ‘Up/Down’ keys to set the desired ‘Hold’ time (Minutes).......................
• Use the ‘Up/Down’ keys to set the desired ‘Hold’ temperature...........................
• Press ‘DONE’ to conrm selection .................................................................................
You will see the ‘HOLD LEFT’ indication is displayed on screen.
The time will countdown the set duration and then revert to the normal program.
Cancel/Edit Temperature Hold
• Press the ‘Hold’ key once.....................................................................................................
• Press ‘CANCEL’ to cancel the Hold and return to normal operation ...................
• Alternatively, press the ‘EDIT’ key to adjust current ‘Hold’ settings .....................
To edit ‘Hold’ settings follow the same procedure as indicated in the steps
at the top of this page.