Heatmiser Touch Series - Temperature Control

20
Model: Touch Carbon
Temperature Control
Until next
programmed
‘Comfort Level’ time.
Set Temperature
• The ‘Up/Down’ keys allow you to adjust the set temperature ...............................
When you press either key, you will see the words ‘SET TEMP ’ and the desired
temperature value.
• Press ‘DONE’ to conrm temperature setting and return to the main display..
Note: This new temperature override is maintained only until the next programmed
comfort level. At that time, the thermostat will revert back to the programmed levels.
• Alternatively, to cancel this override, press the Up or Down key..........................
then press ‘CANCEL’ ..........................................................................................................................