Heden IPCAM - Using a Router to Access the Internet; Static IP User

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IPCAM User Manual
- 22 -
user by Email.
3.4 Using a router to access the Internet
Using a router to access the Internet by shared ADSL If a router is set for dial-up Internet
access,it is not required to set ADSL dial-up account and password on the IP Camera.
!
Figure 3.3
1) Use Network cable connect IP Camera to the LAN.
2) Enter IP Camera Tool to set the basic configuration.(details:
2.1 )
3) login the Camera homepage as Administration.
4) Enter DDNS Settings Page and ennable DDNS service .Click <Submit> and the
device will reboot. (details:
2.5.3)
5) You can access the Camera from Internet by domain name.
3.5 Static IP user
Static IP user is not need to use DDNS for remote access. When finished the setting of the
IP Camera in LAN,you can access the Camera directly from Internet by the WAN IP.You
can obtain the WAN IP by two ways.
Obtain the WAN IP from some Website
You can discover this easily by opening on a computer using the same connection as the
IP camera and entering this address:
http://www.whatismyip.com.The page at this
address will show you the current WAN IP.