ENDE
Operating Instructions • Overhead Suspension AT2000 CPK • 03/2020 • 106-29021
3
Translation of the original operating instructions
Installation instructions
Contents
1 User information .....................4
1.1 Field of application ................4
1.2 Warranty ........................4
1.3 Manufacturer contact data ..........4
1.4 Information on the operating
instructions ......................4
1.5 Copyright and intellectual
property rights ...................4
1.5.1 Used labels and symbols ............4
1.6 Keeping and handing over these
instructions ......................4
1.7 Target group of these instructions .....4
1.8 Applicable documents ..............4
1.9 General information ...............4
2 Safety instructions ....................5
2.1 Representation and layout of
warning instructions ...............5
2.2 Classification of the warning
instructions ......................5
2.3 General safety instructions for
power tools ......................5
2.4 Basic safety instructions .............5
2.4.1 Cleanliness at the workplace .........5
2.4.2 Spare parts and accessories ..........5
2.5 Intended use .....................6
2.6 Misuse .........................6
2.7 Operator obligations ...............6
2.8 Personnel qualification .............6
2.8.1 Qualified personnel for operation .....6
2.8.2 Qualified personnel for maintenance
and repairs ......................6
2.8.3 Trained electrician .................6
2.8.4 Authorised qualified personnel for
repairs and inspection ..............6
3 Layout and function ...................7
3.1 Layout ..........................7
3.2 Scope of delivery ..................7
3.3 Function ........................7
4 Transport and storage .................7
5 Installation and initial operation .........8
5.1 Required installation tools ...........8
5.2 Installing the overhead suspension ....8
5.3 Suitable workplace ................9
5.4 Installing the overhead suspension
at the workplace ..................9
5.5 Using the tool ....................9
5.5.1 Adjusting the balancer (cable pull) .....9
5.6 Installing the power supply unit
with control box .................10
5.7 Connecting the CPK power
supply unit .....................10
5.8 Inserting the cable tie reel ..........11
5.9 Commissioning before every use .....11
5.9.1 Check before operation ............11
5.9.2 Check after operation .............11
6 Operation ..........................12
6.1 Switching the tool on and off .......12
6.2 Inserting the band chain in the tool ...12
6.3 Putting the tool into working
position ........................12
6.4 Operating the tool ................12
6.5 Emptying the waste bin ............12
6.6 Moving tool from working
position ........................12
6.7 Replacing empty cable tie reels ......12
7 Troubleshooting .....................13
8 Maintenance ........................13
8.1 Cleaning .......................13
8.1.1 Cleaning the overhead suspension ...13
8.2 Maintenance ....................13
8.2.1 Important information .............13
8.2.2 General maintenance measures ......13
8.3 Repair .........................13
9 Taking out of operation ...............14
9.1 Taking the overhead suspension
out of operation .................14
9.2 Recommissioning the overhead
suspension .....................14
10 Disposal ............................14
11 Technical data .......................15
11.1 Dimensions .....................15
11.2 Work area ......................16
11.3 Weight ........................16
12 Customer service and spare parts .......16
To Next Page
Loading...
