HER CHEE ATV-90 - Installation of Kick Pinion; Kick Pinion Spring Clip; Check of Starter

8-4
Starter / Driving Disc / Clutch / Transmission Disc
Operation / Parts name Q’ty Remark
9
8
7
6
5
4
3
2
1
Assembly
Washer
Starting shaft reset spring
Starting shaft ass’y
Plain washer
External ring clamp
Kick crank
Hex washer face bolt
Kick pinion
Kick pinion spring clip
1
1
1
1
1
1
1
1
1
4WARNING: Unable to install main
shaft fix position when inside and
outside reset spring overlap. Use
flat-driver screw start from inside
then outside spring and press
main shaft.
Installation of Kick Pinion
/ Kick Pinion Spring Clip
‧Set kick starter shaft first.
‧Turning starter, hang kick pinion spring
clip on crank shaft case convex and
assembly of kick pinion to the location
of removing.
‧Turning starter, let starting shaft and
kick pinion conjoin.
Check of Starter
‧Check the wear & damage of starting
shaft or gear.
‧Check the tightness & damage of
starting shaft reset spring.
‧Check the wear & damage of bush.