Hercules 10 - SECTION 7 - USING THE SYSTEM; 7.1 - Setting the System; 7.2 - Omitting Zones; 7.3 - Unsetting the System

10 Zone LED Alarm Panel - Engineering Manual
9
2.4 - Remote Keypads
1). Select LED remote keypad jumper
2) Wiring diagram
Keypad 1
Keypad 2
Keypad 3
Keypad 4
Address A
ON OFF ON OFF
Address B
ON ON OFF OFF
To set the address of the Remote Keypads, please apply the jumper links as follows,